Available designs come in 3 and 4-leg derrick confi gurations that can accommodate several risers per structure. This system is capable of discharging several waste gas streams within a small footprint, generally not larger than 30 by 30 meters by 200 meters tall. The mounting and demounting process has proven to be easy and reliable. The fl are tips can be lowered to allow for maintenance without having to shut down the flare system. The tips are then easily
accessible at grades where they can be maintained safely while the gases from the riser are diverted to a secondary operational riser.

Process technology is based on adsorption of the VOC stream onto activated carbon, vacuum regeneration of the carbon and absorption of desorbed VOC in the liquid phase in an absorber column with liquid absorbent circulation. This process has been recognized by several Environmental Authorities as BDT (Best Demonstrated Technology) to recover VOC from fuel loading applications. A user-friendly PLC control package and SCADA are designed to limit your down time and store all the process data for easy troubleshooting.

Applications

Truck loading
Ship loading
Rail loading
Tank breathing


The AEREON / Jordan Technologies Activated Carbon VRU recovers greater than 99% of VOCs generated during product loading providing an attractive pay back on capital investment. Recovery rates for gasoline

Typical Products Recovered

Gasoline
Gasoline blending stocks
Naphtha
Crude Oil
Aromatics (Benzene, Toluene, Xylenes)
Bitumen, fuel oil

VISR is officially approved by the Oil and Gas Methane Partnership (OGMP) 2.0, a globally recognized initiative, and endorsed by the Oil and Gas Climate Initiative (OGCI) for accurate methane emissions inventories and regulatory compliance.
BENEFITS

• Turn-key service!
• Non-contact remote sensing instrument – no process interruption for installation, no damage due to corrosive process streams, high system reliability.
• “All-in-One” device that can replace monitors for presence of pilot flame, visible emissions, and flaring rate.
• Significantly lower cost when compared to methods prescribed in the regulation.
• Credit for lower GHG emissions per EPA proposed changes to the GHG reporting rule (40 CFR 98 Subpart W).
• Significant savings in Waste Emission Charge (WEC), up to~$350,000 per year for a large flare (e.g., 950 Mcf/d), if the facility has WEC obligation.
• “Low hanging fruit” in WEC reduction through “netting” in the EPA proposed WEC rule.

SERVICES PERFORMED

 Equipment (Mantis Lite™, equipment panel, mounting bracket, and accessories as needed)
 Installation and commissioning
 Quarterly site visits and on going maintenance
 Assistance in preparation of EPA request for alternative method, if applicable
 Assistance in preparation of a monitoring plan, if applicable
 Preparation of quarterly and annual reporting, as required
 Guaranteed uptime, including hot-swap equipment replacement as needed
 Minimal site preparation required (120V,15A power, line of sight to flare)

 DRE-Max® for Optimal Combustion:
The DRE-Max® smart control system can be easily integrated into existing Plant operational control systems for optimizing air-assisted flares for superior combustion efficiency.
 Explore AEREON's DRE-MAX® for flare combustion optimization and emissions reduction!
 Boost air assisted flare efficiency to over 99% with AEREON’s DRE-MAX!
 Optimize flare combustion and achieve sustainability goals with DRE-MAX® by AEREON!

 Below is a testimony of successfully implemented DRE-MAX product ,shared on Linkedin .

https://www.linkedin.com/posts/cimarroninc_creatingacleanerenvironment-activity-7186362780202024961-_y1v?utm_source=share&utm_medium=member_desktop

 Automatic Control of Air Flare VFD for Higher DREs
 Improper control of VFD can lead to violation of regulations on flaring. For Kuwait gas emissions are regulated by environmental protection regulations (Kuwait Environmental Public Authority) through Kuwait Oil Company, has endorsed zero routine flaring by 2030 .Part of this objective would be to ensure that existing flares are performing at optimum combustion efficiency (with maximum Destruction and reduction efficiency ) . Introduction of DRE-MAX to air assisted flares will ensure this is achieved .
 As per Decree No.2 for 2017: executive regulations about engineering and environmental specifications for facilities in Kuwait. They require operators to limit and control the amount of emissions during operation and maintenance of these installations.
Article 43 introduces specifications for oil and gas extraction and production facilities, including that they must reduce and control emissions in the different project phases (design, operation and maintenance). Implementing DRE-MAX for air assisted flare ensure that the steps are towards achieving the goal for Kuwait.
 Automatic control can
o Ensure compliance and avoid costly fines and emissions.
o Increase DRE from 98% to 99%, cutting emissions by half.
o Allow expansion of production (otherwise capped by emission tonnage).
o Save operating costs by not running the blower at high speeds all the time.

Standard VMSA Flares
We offer standard design packages in sizes up to 10” gas inlet diameter and standard height increments up to 60ft OAH to fit your specific needs
Modified Standard VMSA Flares
We offer modifications to our standard design packages that can be customized to fit your specific needs
Custom VMSA Flares
We offer fully customized design packages for any size gas inlet diameter and any height requirement, that can be customized to fit your specific needs

Advantages of AEREON:
• High quality, customer focused global leader that is still small enough to care
• Most advanced and intuitive VRU control system available for ease of
operations
• Can exceed the world's most stringent emission requirements through
application of a vanety of technologies
• Broad portfolio Of cost-effective quality gas and vapor handling, combustion
and recovery technologies and services
• Turnkey engineering and project management which mitigates risk for the site
owners
• One ot the largest field semce organizations In the world for VRU's / VCU's
providing 24/7 coverage when required. to keep you runntng etfictently and
compliant
• The CEB@ technolow IS utilized In US Coast Guard certified Manne Vapor
Combustion Units.
• Ultra-Low Emissions:
@ NOx emissions of f 15 ppmv at 3% oxygen
@ CO emissions of S 10 ppmv at 3% oxygen
@ VOC destruction efficiency of 99.9%

Air flare systems are composed of two concentric risers and one or more blowers providing supplemental combustion air. A blower forces air into an outer air annulus where the process gas passes through an inner riser and upon reaching the flare tip, these two streams intermix. This air assist has three principle effects:
 High-pressure airflow causes turbulence in the waste stream which improves mixing and therefore enhances combustion efficiency.
 Additional air is induced into the waste gas providing the oxygen necessary for augmented
smokeless capacity.
 Constant airflow creates a cooling effect for extended flare tip service life.

A Data-Driven Solution for Optimizing Energy Facilities, Enhancing Safety & Reducing Emissions
-Streamline Maintenance Programs
-Optimize Equipment Uptime & Performance
-Detect, Quantify & Reduce Emissions with 24/7 AI Powered Visualization
-Reduce Risk and Operational Cost.

OBJECTIVES
• Uninterrupted detection throughout the site
• Nighttime detection capabilities
• Identify pop off occurrences
• Locate ground leaks
• Recognize fire on a flare from 1200 feet away
• Detect presence of smoke
• Record truck license plates
• Identify individuals without hard hats
• Monitor tank battery levels

Self-supported stack, built-in manual winch, cables, and pullies to raise and lower the stack.
Low pressure (0-5psig), High pressure (5-110psig) and Pipeline/CNG tank blowdown (up to
1200psig) applications.
Includes blower package with VFD and pressure transmitter for Low pressure applications if needed.
Model 850 pilot with solar powered ARControl™ Burner Management System (BMS). no electricity or fuel gas needed for the ignition system.

Design Features

Engineered, Modular solutions
Over 12 standard models available
NACE compliant skids available for sour service
Automatic PLC operation (smart phone compatible)
SCADA outputs
ATEX certified
0-100% Flow Turn Down
Flooded screw compressor design
API 681 Liquid ring compressor design
Discharge Pressure > 10 barg

Advantages

Reduce Combustion Emissions, including NOx, CO, CO2, and SOx
Reduce Purchased Fuel Gas
Reduce Flaring Light, Noise, and Odor
Reduce Steam Consumption
Recover Valuable Gas
Extend Flare Tip Life
Improve PR & Company Image

AEREON's Flare Industries business unit is ISO-9001 certifi ed and located in Austin, Texas, USA, the company's Center of Excellence for Combustion. It has itself over 30 years of experience supplying original fl are equipment as well as retrofit flare tips and auxiliary equipment such as pilot systems and controls for all OEM designs.
Flare system designs include basic Utility Flares, Steam/Gas/Air Assisted Flares, all the way to complex high velocity variable orifice sonic-tip designs for use in upstream and downstream applications.
With one of the largest and most skilled equipment engineering and service groups in the world for vapor and gas equipment, AEREON offers 24/7 coverage in most countries, with continously updated and cost-effective system designs for fl are upgrades and retrofits. AEREON's retrofi t services include engineering studies, fabrication, installation supervision, start-up services and post-start-up troubleshooting and support.

To learn more about AEREON's fl are tip retrofi t services, contact us today at
sales@aereon.com or check out our website at www.aereon.com.

Thermal Oxidizer Advantages
• Controlled combustion process provides
predictable and measureable emissions allowing
you to meet regulatory requirements
• Ease of emissions sampling and testing, reducing
time and cost of periodic test requirements
• No visible fl ame or smoke
• Provides up to 99.9% destruction effi ciency for a
wide range of compounds
• Fuel effi cient destruction of a wide range of
hydrocarbons and gas mixtures

Design Features
• Temperature controlled system
• Compact skid mounted design
• Reliable burner management system in
accordance to NFPA 86
• Fuel effi cient packaged burners providing
cost effective operation
• Durable refractory lined chamber
• Combustion and cooling air blowers

With more than 40 years of field service experience, our Aftermarket Field Service Engineers have developed a great deal of experience in Vapor Recovery Units, Enclosed Combustion equipment, Flare Systems, Incinerators, and Flare Gas Recovery Units. Our goal is to keep our customers in compliance with the local and regional environmental regulatory agencies as well as to help their operations run smoothly and reliably. Our experienced Team is well diversified and fluent in seven languages: English, Italian, Dutch, German, Portuguese, French and Spanish. We have helped and supported customers in more than 30 countries around the world working alongside End Users, Engineering Companies and Contractors.

Features

Customized maintenance programs (Corrective and Preventative)
System evaluation, retrofits, and upgrades
Emission testing
Activated Carbon testing (ASTM D2862 Particle Size Distribution, ASTM D5228 Butane Working Capacity)
Unit commissioning and Startups
Personalized training programs
Supervisory Control and Data Acquisition (SCADA) systems
PLC Retrofit and new installations
Human Machine Interface (HMI) upgrades
Automated regulatory reporting systems
Remote diagnostic
Largest spare parts selection worldwide
Equipment Rental

Advantages

Remote troubleshooting
24/7 Emergency Support
Largest Rental Combustion Fleet in Europe for emergency cases, maintenance and backups
Key spare parts available for quick delivery
Crew ready for worldwide deployment
Diversified personnel fluent in 7 languages
Diversified experience in combustion and recovery technology