![](/images/companies/2388/resources/757 Group_700.webp)
![](/images/companies/2388/logos/OCR Compass Logo_LOR Font_300.webp)
OIL CENTER RESEARCH INTERNATIONAL
See us at ADIPEC 2024 · Booth: 7536
Since 1960, we are a supplier of cleaners, corrosion inhibitors, degreasers, geothermal products, pipe coatings, specialty lubricants, storage compounds, thread compounds for drilling & casing operations, thread locking kits, valve lubricants & sealants and wireline grease/honey oil (biodegradable versions available for most products).
Lafayette, Louisiana (LA), United States
Oil · Gas · Energy, Maritime, Mining
Products & Services
People
Connect with us at
Products & Services
ZN50 Tool Joint & Drill Collar Compound
Oil Center Research International
ZN50 Tool Joint Compound is manufactured with the finest powdered metallic zinc and a high temperature, extreme pressure, petroleum base composition. The zinc used in the manufacture of ZN50 meets API and IADC requirements. ZN50 reduces plating and buildup of zinc, a problem encountered with other zinc products. This product conforms to the recommendation of “Tool Pushers Manual” (IADC-International Association of Drilling Contractors), Section B-2, Pages 1 and 2, and API (American Petroleum Institute) RP 5A3/ISO 13678. ZN50 contains less than 0.3% sulfur as recommended by tool joint manufacturers. ZN50 has good brushability over a wide range of temperatures, is resistant to water washout, has good adhesion to surfaces, and prevents against rust and corrosion.
782 Biodegradable Wireline Spray
Oil Center Research International
782 Biodegradable Line Spray is a non-contaminating, environmentally acceptable wireline spray. 782 Biodegradable Line Spray may be used on wire rope and cable for protection against corrosion. 782 Biodegradable Line Spray is formulated to protect wireline from the effects of corrosive chemicals commonly found in downhole production. 782 Biodegradable Line Spray will protect the complete braided wireline against the corrosive effects of acids, caustics, salt water, and most chemicals, including hydrogen sulfide. 782 Biodegradable Line Spray contains special wetting ingredients that enable it to penetrate the surface down to the inner core of the wireline. 782 Biodegradable Line Spray also provides a lubricating effect to the wireline, thus reducing most wear caused by continuous use. 782 Biodegradable Line Spray is designed to be used with spray equipment commonly mounted by most wireline truck units. This environmentally acceptable wireline corrosion inhibitor can also be applied by brushing each layer of wireline as it is made up on the spool. 782 Biodegradable Line Spray has an operating sprayable temperature range of 50°F to 100°F (10°C to 37°C).
776 Wireline Lubricant and Sealant with Corrosion Inhibitor Package
Oil Center Research International
776 Wireline Lubricant and Sealant, manufactured with corrosion inhibitors, is designed for more effective wireline lubrication and ease of wireline operations. Recommended for operations where different pressures exist, 776 Wireline Lubricant and Sealant provides better seal retention. In addition to maintaining and holding higher seal pressures, 776 Wireline Lubricant and Sealant will reduce the friction of the wireline, thus keeping wear on wireline and flow tubes to a minimum. 776 Wireline Lubricant and Sealant will retain higher working pressures, resulting in reducing the loss of condensate, fluids, or gas from the well. 776 Wireline Lubricant and Sealant is most effective under high shock conditions for the reduction of drip and splatter. The special cohesive and adhesive properties prevent wellsite contamination. 776 Wireline Lubricant and Sealant provides protection against hydrogen sulfide (H2S) and inhibits against the corrosive effects of acids, caustics, and salt water.
306 OCR Modified Lead-Free Thread Compund
Oil Center Research International
306 OCR Modified is a superior thread compound for casing, tubing, and line pipe that meets the performance requirements of API RP 5A3/ISO 13678. 306 OCR Modified was researched and field-tested long before others were on the drawing board. Having the same appearance, consistency and sealing properties of API thread compounds, 306 OCR Modified is used with excellent results during hydrostatic testing, and in downhole service. It contains corrosion and H2S inhibitors to eliminate thread corrosion and pitting. The component materials used in the manufacture of 306 OCR Modified meet or exceed performance objectives stated for API thread compounds.
Protekto-Coat 1114
Oil Center Research International
Protekto-Coat 1114 is a HAPS-free, environmentally friendly pipe coating formulated to provide excellent temporary protective coating to external tubular surfaces while the pipe is in storage. This premium, water-based, clear pipe coating is the result of the latest available technology in waterborne coatings in terms of metal protection. It is manufactured using biodegradable raw materials. This fast drying coating provides low VOC emissions and exhibits good adhesion to steel surfaces. Protekto-Coat 1114 provides a high gloss finished coating which results in long lasting protection against corrosion without flash rusting, thus minimizing metal loss. Protekto-Coat 1114 is a high performance coating having excellent impact resistance while providing good surface penetration. Protekto-Coat 1114 produces a clear, durable film that resists cracking, peeling, or scaling off under varying conditions. Protekto-Coat 1114 can be used for tubing, casing, line pipe, drill pipe, coiled tubing, pipe racks, steel tanks, structural steel, and drilling rigs.
236 Metal-Free Tool Joint & Drill Collar Compound
Oil Center Research International
236 Metal-Free Tool Joint and Drill Collar Compound provides maximum protection to the drill string. 236 prevents galling, seizing, thread damage, and excessive wear resulting in prolonged tool joint and drill collar life. This non-contaminating tool joint and drill collar compound resists washout and will not harden or dry out in the connection. 236 is a metal-free tool joint and drill string compound which enables ease of makeup and breakout of all joints and provides the required thread and shoulder protection under various operating conditions. The absence of metals and presence of corrosion inhibitors make 236 a superior tool joint and drill collar compound.
318 OCR Modified Metal-Free Thread Compound
Oil Center Research International
318 OCR Modified is a superior thread compound for casing, tubing, premium connections, and line pipe. It provides excellent performance in the areas of lubricity, sealing properties, make-up/break-out torque, and long-term corrosion protection during periods of storage. 318 OCR Modified contains no metals which may create a corrosive atmosphere thereby eliminating galvanic corrosion while making 318 OCR Modified the ideal product for today’s stringent environmental concerns. 318 OCR Modified is recommended for application to threads being hydrostatically tested. 318 OCR Modified is manufactured using components that meet or exceeds the listed performance objectives in API RP 5A3/ISO 13678. 318 OCR Modified meets the objective for eliminating hazardous materials in the workplace as presented in OSHA Communication CFR 1910.1200. 318 OCR Modified is high temperature and high pressure rated and contains corrosion and H2S inhibitors to eliminate thread corrosion, pitting and to provide extended protection to tubular threads. Note: 318 OCR Modified is not recommended for rotary shouldered connections. In use for years now, 318 OCR Modified has provided excellent results for pipe storage, downhole service, and hydrostatic testing. This triple servicing ability assures you of a safe, effective, and economical way to meet all your casing, tubing, premium connections and line pipe thread compound needs.
527 Hyposeal
Oil Center Research International
527 Hyposeal effectively reduces or completely seals leaks in tubing, casing, surface units, wellhead flanges, production lines, and pressure control equipment used in the oilfield, petrochemical, and general industries. A seal can be affected even in instances where the exact location of the leak cannot be determined. The ID of the line is not reduced by the use of this product. 527 Hyposeal is made with LIQUILON®*, which produces a seal that controls leakage in operating systems. LIQUILON®* is inert and unaffected by acids, oils, caustics, alkalis, common solvents, or extreme well conditions. 527 Hyposeal seals by differential pressure, never becoming brittle but providing a flexible, permanent seal, which does not restrict the production flow. In addition, it seals under high or low pressure and remains effective at high well temperatures. Because of its effective sealing capabilities, 527 Hyposeal eliminates downtime and shutdown of equipment.
235 Biodegradable Tool Joint & Drill Collar Compound
Oil Center Research International
235 Biodegradable Tool Joint and Drill Collar Compound is a non-metallic compound that is recommended for use on tool joints, drill collars, and other rotary shouldered connections. 235 Biodegradable Tool Joint and Drill Collar Compound is recommended as an alternative to conventional zinc, copper, lead, or Teflon®** compounds. The absence of metals eliminates corrosion problems, making 235 Biodegradable Tool Joint and Drill Collar Compound the ideal tool joint and drill collar compound for today’s stringent environmental concerns. 235 Biodegradable Tool Joint and Drill Collar Compound meets the objective for eliminating hazardous materials in the work place, as presented in OSHA Communication 29 CFR 1910.1200. It meets torque break-out, circumferential tightening, and makeup torque as recommended by tool joint manufacturers. 235 Biodegradable Tool Joint and Drill Collar Compound is designed for drilling hard formations, deep drilling, breaking in new tool joints, directional drilling, crooked holes, and other high torque conditions. 235 Biodegradable Tool Joint and Drill Collar Compound has passed the LC-50 toxicity test.
617 Resist-All
Oil Center Research International
617 Resist-All is a lubricant and sealant for gate, ball, and plug valves exposed to CO2 and H2S. This product is also oil and gasoline resistant and can be used in numerous oilfield applications including wellheads, petrochemical plants, and pipelines. 617 Resist-All has excellent resistance to fresh and salt water, gasoline, aviation fuel, lubricating oils, and many downhole chemicals and frac fluids. 617 Resist-All services temperatures from 0°F to temperatures greater than 500°F, making it very versatile for a broad range of applications.
757 Lift Boat Gear Lube
Oil Center Research International
757 Lift Boat Gear Lube is a black, extreme-pressure grease with excellent water-resistant properties. It offers excellent adhesive and cohesive properties. 757 Lift Boat Gear Lube has a very tacky texture yet remains very smooth and buttery. Manufactured with graphite and molybdenum disulfide (moly), 757 Lift Boat Gear Lube forms a protective lubricant coating under heavy loads which prevents metal-to-metal contact. This lubricant has excellent load carrying capability and is very resistant to water washout. A NLGI grade 3 grease, 757 Lift Boat Gear Lube services temperatures from -8 (-22°C) up to 275°F (135°C) and is non-corrosive to copper and steel.
221 Copper Seal II Tool Joint & Drill Collar Compound
Oil Center Research International
221 Copper Seal II is a lead free, zinc free, quality lubricating compound that handles high temperatures and provides anti-seize performance required for breaking in new tool joints and lubricating drill collars. It is used in all drilling and anti-seize applications in the petroleum industry including refineries, petrochemical plants, and the water well industry. 221 Copper Seal II is recommended for use on all rotary shouldered connections and provides protection against galling and seizing or damage to threads on drill collars and tool joints, even under the most demanding conditions, including the deepest, hottest wells. It eliminates the need for wire brushing of threads to remove buildup often experienced with compounds that contain lead or zinc. 221 Copper Seal II assures constant makeup torque, is effective when used on downhole production tools or pumping equipment and is recommended for use in areas of high temperatures.
250 Liqui-Lok Thread Locking Compound
Oil Center Research International
250 Liqui-Lok Thread Locking Compound is a two part epoxy compound used to replace the welding of casing joints and threaded connections. 250 Liqui-Lok is unaffected by vibration, pounding, or expansion due to temperature changes. It withstands high break-out torque and provides a leakproof seal. 250 Liqui-Lok is easily mixed under varying temperatures due to its workable consistency in excess of one hour.
325 OCR Modified Biodegradable Thread Compound
Oil Center Research International
325 OCR Modified Thread Compound is a superior non-metallic thread compound for casing, tubing, premium connections, and line pipe. This thread compound was tested in conformance with the requirements of API formulated thread compounds. The absence of metals eliminates galvanic corrosion while making 325 OCR Modified the ideal thread compound for today’s stringent environmental concerns. 325 OCR Modified meets the objective for eliminating hazardous materials in the work place as presented in OSHA Communication 29 CFR 1910.1200. In addition to meeting today’s environmental needs, 325 OCR Modified will provide excellent lubricity to premium connections designed to provide metal-to-metal sealing. 325 OCR Modified will also provide continuous sealing properties, corrected make-up/breakout torque, and corrosion protection to tubular goods during short periods of storage. 325 OCR Modified has passed the LC-50 toxicity test and has a friction factor of 1.0.
People
Connect with us at
Add Attachment
![](/empty.png)
Share
Recent Chats
Share via email
Future: handle WhatsApp here
Future: handle LinkedIn here
Future: handle Twitter here
SUBMENU HERE
Share via Chat
Copy Link