NW BLUE
Portland, Oregon (OR), United States
Aerospace
Products & Services
Cube Blue H7
NW Blue
The world′s most advanced autopilot for open autonomous unmanned vehicles. Redundant, temperature controlled, isolated.
Equipped with High Performance H7 Processor. The H7 has double-precision (DP) FPU, 1MB RAM, and 400MHz CPU processor provides high performance, extremely fast operation, and stable solution for flight.
- STM32H753; flash 2MB, RAM 1MB
- On-board 16KB SPI FRAM
- MS5611 Barometer
Manufactured in USA with US and allied components
HX4-06154 Cube Blue H7
1x - Cube Blue H7
Equipped with High Performance H7 Processor. The H7 has double-precision (DP) FPU, 1MB RAM, and 400MHz CPU processor provides high performance, extremely fast operation, and stable solution for flight.
- STM32H753; flash 2MB, RAM 1MB
- On-board 16KB SPI FRAM
- MS5611 Barometer
Manufactured in USA with US and allied components
HX4-06154 Cube Blue H7
1x - Cube Blue H7
Kore Carrier Board
NW Blue
The primary purpose of the Kore Multi-Rotor Carrier Board for The CUBE is to reduce the rat’s nest of wires and modules typically associated with a multi-rotor assembly. It provides built-in power distribution, redundant power supplies for the autopilot, built-in fail-over power selection, a separate payload power regulator, and many other features.
While this carrier board is geometrically optimized for quadcopters, X8 configurations, and octocopters, it provides connections for every function of The CUBE autopilot. Therefore, this board can be integrated into any vehicle type that is supported by The CUBE, including all other multi-rotor frame types, plane, rover, sub, and antenna tracker.
- Up to 12-cell Lithium battery (50.4V)
- 140A continuous current with 280A surges
- Power and signal for ESCs conveniently located in corners
- 12V navigation light power available at each cornerBuilt-in power distribution
- Built-in voltage and current sense
- Redundant power supplies for flight critical components
- Payload connectors with resettable fuses for 5V, 12V, and direct battery power
- Good power and error indicator lights
- Built-in buzzer with volume control
- Connectors for every function of Pixhawk Cube
- Easily accessible PWM voltage level selector (3.3V or 5V)
- Resistant to ground bounce on PWM signal
- Connector-compatible with standard ProfiCNC carrier board
- Connector ports for debugging IO and FMU processors
While this carrier board is geometrically optimized for quadcopters, X8 configurations, and octocopters, it provides connections for every function of The CUBE autopilot. Therefore, this board can be integrated into any vehicle type that is supported by The CUBE, including all other multi-rotor frame types, plane, rover, sub, and antenna tracker.
- Up to 12-cell Lithium battery (50.4V)
- 140A continuous current with 280A surges
- Power and signal for ESCs conveniently located in corners
- 12V navigation light power available at each cornerBuilt-in power distribution
- Built-in voltage and current sense
- Redundant power supplies for flight critical components
- Payload connectors with resettable fuses for 5V, 12V, and direct battery power
- Good power and error indicator lights
- Built-in buzzer with volume control
- Connectors for every function of Pixhawk Cube
- Easily accessible PWM voltage level selector (3.3V or 5V)
- Resistant to ground bounce on PWM signal
- Connector-compatible with standard ProfiCNC carrier board
- Connector ports for debugging IO and FMU processors
About
NW Blue is a manufacturer and distributor of sUAS components. We are located in Portland, Oregon USA. We manufacture our components in-house with USA and globally sourced components.
We value our customers and respect the challenges that encompass the industry we work in. NW Blue offers full customer support with our products. We at NW Blue like to think of ourselves as an extension of our client's team. We are here to support and help our customers with any assistance they may need while integrating our product and beyond.
As a USA based manufacturer and distributor, we take safety, security, and privacy seriously. When manufacturing our components locally, we thrive to adhere to the evolving NDAA compliancy guidelines. NW Blue has partnered with CubePiot PTY LTD, an Australian owned and operated company, to manufacture the Herelink Blue in the USA. Our 889 certification states we do not utilize any black listed companies covered under the current NDAA.
We value our customers and respect the challenges that encompass the industry we work in. NW Blue offers full customer support with our products. We at NW Blue like to think of ourselves as an extension of our client's team. We are here to support and help our customers with any assistance they may need while integrating our product and beyond.
As a USA based manufacturer and distributor, we take safety, security, and privacy seriously. When manufacturing our components locally, we thrive to adhere to the evolving NDAA compliancy guidelines. NW Blue has partnered with CubePiot PTY LTD, an Australian owned and operated company, to manufacture the Herelink Blue in the USA. Our 889 certification states we do not utilize any black listed companies covered under the current NDAA.
