UTG ACCU-SYNC 2521R Dot Sight, Red 3.0 MOA Single Dot, for Mini ACOG Footprint, OP-DS2521R
Quick to Acquire and Shooter Configurable
Reliable Performance
Durable Construction
Recoil Rated Up to .450 Bushmaster
See us at Milipol Paris 2025 : 5-H072
UTG ACCU-SYNC 2521R Dot Sight, Red 3.0 MOA Single Dot, for Mini ACOG Footprint, OP-DS2521R
UTG® ACCU-SYNC™ dot sights come in a compact and subcompact size and feature a red illuminated 3 MOA dot with 8 manually adjusted brightness intensity settings to choose from. Illumination memory conveniently gets users right back to the last brightness setting used upon activation. Fully sealed, ACCU-SYNC™ dot sights are IPX7 waterproof rated and constructed from matte black anodized 6061-T6 aluminum. Optimized for low power consumption and powered by a single CR2032 battery, a 30,000+ hour battery life (at middle brightness) comes standard.
The mounting base uses the common mini ACOG® footprint and is configured for a lower 1/3 co-witness out of the box. Removing the included riser drops the height down to that of a low mount providing users two commonly used height profiles for different firearm applications. In addition, the base features squared recoil stops and our QR (quick release) mount, making for a quick installation and removal, reliable return to zero, and is compatible with Picatinny rails with widths that may even be out of spec. Tool-free tension adjustment is locked in place via a gear and spring-loaded locking lever interface, allowing users to set it once and forget it.
Material :
6061-T6 Aluminum
Quick-detachable :
Yes
Window size :
0.79
Reticle :
Red single dot
Brightness :
manual, 8 settings
Click value @ 100 yards :
1 MOA
Eye Relief :
Infinity
Linear FOV :
3.77 ft@100yds
Lens Material :
Glass
Optic footprint :
Mini ACOG
Products & Services
UTG AK/AKM Windowed Polymer Magazine, 30 Round, 7.62x39mm, RBT-AKM30
LEAPERS
• Removable Flared Floor Plate
• High Visibility Blue Follower and Stainless Steel Spring
• Steel-reinforced Feed Lips and Locking Lugs
• Raised Bosses for Added Grip Retention
• Ambidextrous Windowed Main Body
• Impact & Heat Resistant Reinforced Polymer
• US PAT. D849178
• High Visibility Blue Follower and Stainless Steel Spring
• Steel-reinforced Feed Lips and Locking Lugs
• Raised Bosses for Added Grip Retention
• Ambidextrous Windowed Main Body
• Impact & Heat Resistant Reinforced Polymer
• US PAT. D849178
INTEGRIX™ iX6 3-18X44 FFP, A2 MOA Reticle, iX603FA2
LEAPERS
• Individually Centration Tested German and Japanese Glass, Concentric Tested Post Assembly
• Multi-Coated Lenses for Glare, Reflection, and Scratch Resistance
• Low Aberration Optimized Image Quality with Over a 92% Light Transmittance
• Edge to Edge Sharpness, High Contrast, and High-Resolution Standard
• Reliable Adverse Temperature and Environmental Performance with -40° to 160° Fahrenheit Operational Range and IPX7 Waterproof Rating
• Rated, at Minimum, for .338 LAPUA Magnum
• Red and Green Reticle Illumination with 8 Brightness Intensity Settings
• 12 Hour Automatic Shutoff
• Side Adjustable Parallax Turret Smoothly and Accurately Adjusts from 30 Yards / 27.4 m to Infinity
• Intuitive Lockable and Zero Resettable Windage and Elevation Turrets, Serrated and Oversized for Glove Use
• Serrated Power Ring and Rear Adjustable Eyepiece Diopter
• Make Transitioning Across Magnification Range Effortless with Included Oversized Throw Lever
• Multi-Coated Lenses for Glare, Reflection, and Scratch Resistance
• Low Aberration Optimized Image Quality with Over a 92% Light Transmittance
• Edge to Edge Sharpness, High Contrast, and High-Resolution Standard
• Reliable Adverse Temperature and Environmental Performance with -40° to 160° Fahrenheit Operational Range and IPX7 Waterproof Rating
• Rated, at Minimum, for .338 LAPUA Magnum
• Red and Green Reticle Illumination with 8 Brightness Intensity Settings
• 12 Hour Automatic Shutoff
• Side Adjustable Parallax Turret Smoothly and Accurately Adjusts from 30 Yards / 27.4 m to Infinity
• Intuitive Lockable and Zero Resettable Windage and Elevation Turrets, Serrated and Oversized for Glove Use
• Serrated Power Ring and Rear Adjustable Eyepiece Diopter
• Make Transitioning Across Magnification Range Effortless with Included Oversized Throw Lever
INTEGRIX™ iX6 4.5-27X56 FFP, M1 MRAD Reticle, iX645FM1
LEAPERS
• Individually Centration Tested German and Japanese Glass, Concentric Tested Post Assembly
• Multi-Coated Lenses for Glare, Reflection, and Scratch Resistance
• Low Aberration Optimized Image Quality with Over a 92% Light Transmittance
• Edge to Edge Sharpness, High Contrast, and High-Resolution Standard
• Reliable Adverse Temperature and Environmental Performance with -40° to 160° Fahrenheit Operational Range and IPX7 Waterproof Rating
• Rated, at Minimum, for .338 LAPUA Magnum
• Red and Green Reticle Illumination with 8 Brightness Intensity Settings
• 12 Hour Automatic Shutoff
• Intuitive Lockable and Zero Resettable Windage and Elevation Turrets, Serrated and Oversized for Glove Use
• Serrated Power Ring and Rear Adjustable Eyepiece Diopter
• Make Transitioning Across Magnification Range Effortless with Included Oversized Throw Lever
• Multi-Coated Lenses for Glare, Reflection, and Scratch Resistance
• Low Aberration Optimized Image Quality with Over a 92% Light Transmittance
• Edge to Edge Sharpness, High Contrast, and High-Resolution Standard
• Reliable Adverse Temperature and Environmental Performance with -40° to 160° Fahrenheit Operational Range and IPX7 Waterproof Rating
• Rated, at Minimum, for .338 LAPUA Magnum
• Red and Green Reticle Illumination with 8 Brightness Intensity Settings
• 12 Hour Automatic Shutoff
• Intuitive Lockable and Zero Resettable Windage and Elevation Turrets, Serrated and Oversized for Glove Use
• Serrated Power Ring and Rear Adjustable Eyepiece Diopter
• Make Transitioning Across Magnification Range Effortless with Included Oversized Throw Lever
UTG PRO MP5 Monolithic M-LOK Handguard, MTU055SSM
LEAPERS
Precision CNC machined from 6061-T6 aluminum and with an overall installed weight of only 9.6 ounces, the handguard is finished in H-146 graphite black Cerakote® in replace of a matte black anodize. A decision we made in efforts to better match the painted finish found on MP5 receivers. Our patented claw mount locking interface utilizes four proprietary lugs that are inserted from the sides and through the upper monolithic portion of the handguard where four vertically installed T10 screws securely clamp the lugs against the receiver.
The handguard, which practically spans the length of the MP5’s sight radius, provides an extended 16-slot Picatinny top rail that begins just forward of the rear sight drum and ends just before the charging handle recess notch. A cutout in the rail allows for positive identification of the serial number. Speaking of the recess notch, the part of the handguard that overlaps the notch is chamfered to specifically prevent hot spots or snag points from happening when manipulating the charging handle with or without gloves. In addition to the chamfer, access to the charging handle remains quick and effortless and shooters will have no worry about tearing up their fingers or knuckles as the top of the handguard transitions from Picatinny to M-LOK® the remainder of the way to the front sight.
Around the circumference of the handguard are a total of 17 full and 5 half M-LOK® slots. In addition, two integral anti-rotational QD sockets are featured and are located toward the front of the handguard at the 3 and 9 O’clock positions. The multiple M-LOK® positions make quick work of installing lights, lasers, foregrips, and more onto the receiver of the MP5. A task that is somewhat of a conundrum for the classical MP5 compared to more modern offerings. The UTG PRO® MP5 monolithic handguard is designed for the 9mm receiver MP5 and clones and is compatible with most, if not all, collapsible and fixed stocks.
The handguard, which practically spans the length of the MP5’s sight radius, provides an extended 16-slot Picatinny top rail that begins just forward of the rear sight drum and ends just before the charging handle recess notch. A cutout in the rail allows for positive identification of the serial number. Speaking of the recess notch, the part of the handguard that overlaps the notch is chamfered to specifically prevent hot spots or snag points from happening when manipulating the charging handle with or without gloves. In addition to the chamfer, access to the charging handle remains quick and effortless and shooters will have no worry about tearing up their fingers or knuckles as the top of the handguard transitions from Picatinny to M-LOK® the remainder of the way to the front sight.
Around the circumference of the handguard are a total of 17 full and 5 half M-LOK® slots. In addition, two integral anti-rotational QD sockets are featured and are located toward the front of the handguard at the 3 and 9 O’clock positions. The multiple M-LOK® positions make quick work of installing lights, lasers, foregrips, and more onto the receiver of the MP5. A task that is somewhat of a conundrum for the classical MP5 compared to more modern offerings. The UTG PRO® MP5 monolithic handguard is designed for the 9mm receiver MP5 and clones and is compatible with most, if not all, collapsible and fixed stocks.
INTEGRIX™ iX8 1-8X28 FFP, A1 MOA Reticle, iX801FA1
LEAPERS
• Individually Centration Tested German and Japanese Glass, Concentric Tested Post Assembly
• Multi-Coated Lenses for Glare, Reflection, and Scratch Resistance
• Low Aberration Optimized Image Quality with Over a 92% Light Transmittance
• Edge to Edge Sharpness, High Contrast, and High-Resolution Standard
• Reliable Adverse Temperature and Environmental Performance with -40° to 160° Fahrenheit Operational Range and IPX7 Waterproof Rating
• Rated, at Minimum, for .338 LAPUA Magnum
• Red and Green Reticle Illumination with 10 Brightness Intensity Settings
• 12 Hour Automatic Shutoff
• Intuitive Lockable and Zero Resettable Windage and Elevation Turrets, Serrated and Oversized for Glove Use
• Serrated Power Ring and Rear Adjustable Eyepiece Diopter
• Make Transitioning Across Magnification Range Effortless with Included Oversized Throw Lever
• Multi-Coated Lenses for Glare, Reflection, and Scratch Resistance
• Low Aberration Optimized Image Quality with Over a 92% Light Transmittance
• Edge to Edge Sharpness, High Contrast, and High-Resolution Standard
• Reliable Adverse Temperature and Environmental Performance with -40° to 160° Fahrenheit Operational Range and IPX7 Waterproof Rating
• Rated, at Minimum, for .338 LAPUA Magnum
• Red and Green Reticle Illumination with 10 Brightness Intensity Settings
• 12 Hour Automatic Shutoff
• Intuitive Lockable and Zero Resettable Windage and Elevation Turrets, Serrated and Oversized for Glove Use
• Serrated Power Ring and Rear Adjustable Eyepiece Diopter
• Make Transitioning Across Magnification Range Effortless with Included Oversized Throw Lever
People
Description
• Precision Machined from 6061-T6 Aluminum and Finished in a Matte Black Anodization
• Wide Field of View 20mm Lens Diameter
• Impact Resistant Tempered Glass Lens
• 3 MOA Red Dot with 8 Brightness Settings
• 30,000+ Hours Battery Life at Middle Brightness Setting
• Snag-free Flush Turrets with Crisp 1 MOA Per Click Adjustment at 100 Yards
• IPX7 Waterproof Rated
• Low Profile Quick Release (QR) Mini ACOG® Mount with Lower 1/3 Co-witness Riser Included
• Wide Field of View 20mm Lens Diameter
• Impact Resistant Tempered Glass Lens
• 3 MOA Red Dot with 8 Brightness Settings
• 30,000+ Hours Battery Life at Middle Brightness Setting
• Snag-free Flush Turrets with Crisp 1 MOA Per Click Adjustment at 100 Yards
• IPX7 Waterproof Rated
• Low Profile Quick Release (QR) Mini ACOG® Mount with Lower 1/3 Co-witness Riser Included
