Trusted for over 60 years by major OEM leaders in the aerospace industry, Nycote’s crosslinked, hybrid coatings offer superior anti-corrosion protection from harsh industry conditions. Complete nylon encapsulation provides a pinhole-free high performing coating/sealant that is user-friendly and long-lasting.

Nyform® is a cross-linked, high-performing, clear, lightweight specialty encapsulation coating that protects PCBs and sensitive electronics from severe degrative conditions. Averting dirt, chemicals, extreme temperatures, and excessive vibration are within Nyform capabilities. The proprietary conformal coating creates an extremely strong yet flexible 3-dimensional barrier, completely encapsulating the part from the environment. Conforms to IPCC-C-830 Low viscosity Extreme high and Low temperature resistance Fast Cure High dielectric strength Low stress Formulated to be strong & flexible Fluoresces under UV Light Clear & lightweight Long Service life Removable with Nygone

Excellent permanent barrier from harsh environments. The Nycote formulation is chosen over other coating technologies because of its unique ability to cure pinhole-free and self-level. The process allows for complete encapsulation of the part and will protect it for years due to the strength of the epoxy and flexibility of the nylon polymer. Easy-to-use Environmentally friendly Superior adhesion Decreased VOCs Nycote 99 meets the standards for outgassing per ECSS-Q-ST-70-02.

SurfaceTrace® is an established airworthy coating approved by major Aerospace OEMs, now with a non-removable and invisible element that allows components to be permanently identified as genuine, non-counterfeit, and can carry up to 5 pieces of data to aid in product identification. Additionally, you may use the five pieces of data to track what is important to you. The product is excellent for applications requiring traceability, anti-counterfeit, and overcoating of visible part markings or replacing part markings. Provide a secure, counterfeit-proof, and machine-readable coating technology. Both products allow full traceability, tamper resistance, and product authentication. Low viscosity Low gloss

Apply Nycote® 88 to substrates that need protection from corrosion, electrical conduction and friction. It comes in an easy-to-use two-part component. Combining the two components results in a three-hour window before the formula begins to set.

Our products are easily applied by painting, spraying or dipping areas that need protection from aircraft fuels, oil, lubricants, phosphate ester hydraulic fluids, salt spray and water. Nycote® 88 also provides excellent high impact, abrasion resistance, flexibility and toughness at temperatures of -70°F to +300°F (-57°C to +149°C). NSN: 8010-01-530-5341

Nysafe® is an effective anti-viral permanent surface coating that disrupts SARS-CoV-2 cells (The Severe Acute Respiratory Syndrome Corona Virus 2). Nysafe-AV® 700 is our newest glossy formulation based off Nycote 7-11. Nycote 7-11 is a highly crosslinked multipolymer nylon epoxy coating. Trusted since the 1960’s by all major OEM’s to provide an excellent permanent barrier from harsh environments. The Nycote formulation is chosen over other coating technologies because of its unique ability to cure pinhole-free and self-level. The process allows for complete encapsulation of the part and will protect for years due to the strength of the epoxy and flexibility of the nylon polymer. Nysafe® by Nycote Laboarotories Corporation is an advanced material high-performance permanent surface coating that provides high-touch surface protection. Nysafe uses a safe, effective additive and is proven to have antimicrobial and biocidal activities against various human pathogens while being safe for human touch. It has been widely applied in the process of catalysis, drug control delivery, biosensors, and biofuels. The additive is widely chosen as a catalytic material because it has many advantages, namely thermally stable, chemically inert, and harmless. The micropore category is incapable of providing an entryway for applications involving large molecules. Nysafe-AV 700 also provides excellent high impact, abrasion resistance, flexibility and toughness at temperatures of -70°F to +300°F (-57°C to +149°C). Nysafe-AV 700 has a six-month shelf life and the container can be resealed throughout. Nysafe-AV 700 meets the standards for outgassing per ECSS-Q-ST-70-02 Nysafe-AV 700 meets ISO 22196 International Organization for Standardization Method 22196 – The measurement of antibacterial activity on plastics and other non-porous surfaces.

The Nycotek™ applicator pen eliminates the mess and clean up of hazardous materials in addition to being easily disposable. It’s perfect for small or hard to reach areas and one pen can cover two to four square feet. Easy-to-apply brush on with same corrosion resistant advantages as our Nycote® 7-11 or Nycote 99Ecoshield.

Trusted for over 60 years by major OEM leaders in the aerospace industry, Nycote’s crosslinked, hybrid coatings offer superior anti-corrosion protection from harsh industry conditions. Complete nylon encapsulation provides a pinhole-free high performing coating/sealant that is user-friendly and long-lasting.

Nygone® was created to resolve the issues related to safely removing cured polymer, resin and conformal Coatings. Nygone® will effectively remove most coating products without damaging the part, thus allowing the user an easy removal method. It is occasionally necessary to remove polymer coatings to repair a component or some part of an assembly, or to disassemble parts. However, cured coatings are cross-linked, thermoset resins that do not melt and that may be difficult to remove from a substrate. Nygone® offers safe and effective removal of polymer coatings, minimizing possible damage to the part. Heat, cold, and chemical exposure have commonly been the means of weakening and then removing adhesive bonds or coatings. Nygone eliminates the necessity to use these potentially damaging removal methods.

Apply Nycote® 7-11 to substrates that need protection from corrosion, electrical conduction and friction. The liquid formula can be easily applied by painting, spraying or dipping areas that need protection from aircraft fuels, oil, lubricants, phosphate ester hydraulic fluids, salt spray and water.

Nycote® 7-11 also provides excellent high impact, abrasion resistance, flexibility and toughness at temperatures of -70°F to +300°F (-57°C to +149°C). Nycote® 7-11 has a six-month shelf life and the container can be resealed throughout. NSN: 8010-01-134-0415

Nycote 7-11 meets the standards for outgassing per ECSS-Q-ST-70-02

Nycote 7-11 meets ISO 22196 International Organization for Standardization Method 22196 – The measurement of antibacterial activity on plastics and other non-porous surfaces.

Nycote provides clear hybrid nylon polymer coatings to protect assets with an easy-to-apply solution, keeping your products safer, longer. Nycote is a modified liquid-nylon coating that provides protection to overcome material limitations and guard metals, plastics and composites from wear, corrosion, friction and conductivity. Nycote products are used around the world by traditionally leading OEM manufacturers and aerospace customers. Perfect for aerospace use in commercial and defense settings, from helicopters to drones, Nycote's highly crosslinked nylon epoxy coatings can protect your assets longer.