Tools inserted into the well for both workover and logging efforts, wirelines and slicklines are very similar devices. While a slickline is a thin cable introduced into a well to deliver and retrieve tools downhole, a wireline is an electrical cable used to lower tools into and transmit data about the conditions of the wellbore called wireline logs. Usually consisting of braided cables, wirelines are used to perform wireline logging, as well Braided line can contain an inner core of insulated wires which provide power to equipment located at the end of the cable, normally referred to as electric line, and provides a pathway for electrical telemetry for communication between the surface and equipment at the end of the cable.

CMS-XL slip’s multi-segment-hinged design provides a full wrap-around to help prevent damage to the casing. By adding or subtracting segments and inserts the slip can accommodate 6 5/8” – 30” O.D. casing. These casing slips are manufactured from heat-treated alloy steel, increasing strength and resistance to wear.

Drill Collar Type Slips (DCS) grip drill collar pipe with multiple segments and button inserts. Buttons are circular with no exposed edges that can fracture and chip. Slips hold the string weight in place, acting as a wedge. The slips and inserts are easily changed. To set slips, position the string above the rotary and let it stop completely. Put the slips into the bowl and gradually shift the string weight from the elevator to the slips.

On the power unit, an electric motor drives a dual stage pump at a setting of 1500 rpm (50 hertz (hz) or 1800 rpm (60 hz). The pump draws hydraulic fluid from the tank and delivers hydraulic fluid up to 2500 psi on the pressure line, adjustable at the unloader valve (preset at 1000 psi). The pump delivers 66 GPM at 50 hz and 79.5 GPM at 60 hz. As the line pressure decreases to 1000 psi, volume decreases to 31 or 37.5 GPM (depending on frequency). The higher volume stage of the pump is literally “unloaded” at 1000 psi, simply transferring its volume from the tank directly back to the tank through the return full flow filter with only a few psi pressure. The lower volume state of the pump is always supplying fluid to either the output disconnect or the relief valve at system pressure. The relief valve has a maximum (factory) setting of 2500 psi. The 2500 psi setting is the maximum recommended output pressure for the standard pump. Theoretically the unit could produce 2971 psi at full motor rated output, but pump life will be shortened, possibly dramatically.

These robust elevators provide secure gripping and support, ensuring safe and reliable lifting in various conditions. Engineered for durability and ease of use, our single joint elevators enhance operational efficiency while maintaining high safety standards. Trust our reliable equipment to streamline your tubular handling processes.

DU slips feature a durable construction that ensures a secure grip on casing and tubing, enhancing safety and stability in various environments. Engineered for compatibility with a wide range of tubular sizes, DU slips are versatile tools suitable for both onshore and offshore applications. Their streamlined design allows for easy handling and quick engagement, making them an essential component for optimizing operational efficiency. Trust DU slips for dependable performance in your tubular handling tasks.

Texas International Oilfield Tools provides a comprehensive range of dies and inserts designed for tubular handling equipment, ensuring optimal performance and reliability in the oil and gas industry. Our high-quality products are engineered to enhance the efficiency of operations while maintaining safety standards. Available in various sizes and specifications, these dies and inserts are compatible with our extensive inventory of handling tools, allowing for seamless integration and enhanced functionality. Trust Texas International for innovative solutions that meet the rigorous demands of your operations.

SD Slips feature better contact and distribution of load on drill pipe through a superior wraparound configuration and unique insert design, these rotary slips prevent bottle-necking and gouging damage. The Sd Slips range from 2-3/8" up to 7".

Texas International Oilfield Tools CHD Spider is a specialized tool designed for handling casing and tubing in oil and gas operations. It provides a secure grip during the running and retrieving of tubulars, ensuring safety and stability in challenging environments. The CHD Spider features a robust, lightweight design that allows for easy handling and quick deployment. Its innovative locking mechanism enhances reliability, making it an essential component for efficient drilling and completion activities. With its focus on performance and safety, the CHD Spider helps streamline operations on the rig.

The weldless design minimizes stress concentrations, ensuring enhanced durability and performance in demanding environments. Ideal for use with our elevators, these links help streamline operations while maintaining rigorous safety standards. Trust our weldless elevator links for efficient and secure tubular handling.

Constructed from high-strength materials, the HT Manual Tongs ensure durability and longevity, even under extreme conditions. Their robust design allows for efficient torque application, enabling operators to securely grip and turn pipe or casing with confidence. The tongs feature a user-friendly mechanism that facilitates easy engagement and disengagement, making them accessible for personnel at all skill levels. Safety is paramount in tubular handling, and the HT Manual Tongs are equipped with features that minimize the risk of slippage or accidents during operation. Their ergonomic design helps reduce operator fatigue, enhancing productivity and ensuring smooth workflows.

Texas International Oilfield Tools TA Elevators are critical lifting devices used in the oil and gas industry for handling tubulars, such as drill pipe and casing, during drilling and completion operations. These elevators are designed for enhanced safety and efficiency, featuring robust construction to withstand heavy loads and harsh environments. With a user-friendly design, they allow for quick engagement and disengagement, facilitating smoother operations on the rig. The TA Elevators ensure reliable performance, contributing to safer and more efficient drilling processes.

These robust links are designed for superior strength and reliability in tubular handling applications. The weldless construction ensures a consistent load distribution, enhancing durability and performance under demanding conditions. Ideal for use with various handling equipment, our extension links facilitate efficient operations while maintaining high safety standards. Trust our 350-ton weldless Extension Links to provide the secure and dependable support you need in the field.

The hydraulic power unit requires three (3) phase 460 volts AC. The motor can be requested for 230/220 volts but 460 provides better performance. The hydraulic hoses to the cylinder can be lengthened to 50 feet without affecting cylinder operation, but the five (5) control hoses should remain at 25 feet as longer hoses will adversely affect cylinder reaction time. The top connections are for the control hoses, those on the side are for cylinder hoses. Electrical is connected through the top of the control box. The connections and control switch should be easy to reach. The fluid temperature gauge and filter condition indicator is on the opposite side and will need to be seen and serviced. Mount the power unit (step #2) securely by either bolting or welding it to the rig floor. The unit requires ventilation and secure routing of the five (5) control hoses and two (2) cylinder hoses. The control box should be mounted where 1) it’s convenient to the driller and 2) the 25-foot control hoses will reach. Connect A on the control box to the A on the hydraulic power unit, B to B, etc.

Texas International Oilfield Tools Pneumatic Hinged Casing Spider is a specialized tool designed for handling and supporting casing during drilling operations. Featuring a hinged design, it allows for easy installation and removal while providing a secure grip on the casing. The pneumatic mechanism enhances efficiency, enabling smooth operation even in challenging environments. This spider is built for durability and reliability, ensuring safe handling of tubulars and contributing to overall operational safety on the rig. Its user-friendly design makes it an essential tool for enhancing productivity in casing operations.

Texas International SD Rotary Slips are advanced tools used in the oil and gas industry for securely gripping drill pipe during operations. Designed for use with rotary drilling rigs, these slips provide a reliable hold on the pipe, ensuring stability and safety while tripping in and out of the well. The SD Rotary Slips feature a durable construction that can withstand harsh conditions, making them suitable for various drilling applications. Their innovative design allows for easy handling and quick installation, enhancing operational efficiency and safety on the rig.

Texas International Oilfield Tools offers G Series Elevators, engineered for robust performance in tubular handling applications. Designed for ease of use and superior gripping capabilities, these elevators are compatible with various sizes of pipe and casing. With a focus on safety and efficiency, our G Series Elevators provide the secure handling solutions you need to enhance your drilling and completion processes.

Texas International Oilfield Tools offers a state-of-the-art Power Tong Test Stand, designed to provide comprehensive testing and calibration for power tongs used in the oil and gas industry. This essential piece of equipment ensures that power tongs perform at optimal levels, enhancing safety and efficiency during tubular handling operations. Key Features: Robust Construction: Built with high-strength materials, the Power Tong Test Stand is designed to withstand the rigors of field use, ensuring durability and long-lasting performance. Precision Testing: The test stand allows for accurate testing of torque, pressure, and operational functionality of power tongs. This ensures that all equipment meets industry standards and performs reliably under varying conditions. User-Friendly Design: Featuring an intuitive layout, the Power Tong Test Stand is easy to operate, allowing personnel to perform tests quickly and efficiently. Clear markings and controls enhance usability, reducing the potential for errors. Versatility: Compatible with a wide range of power tong models and sizes, the test stand is suitable for various applications, from drilling to completion. This versatility makes it an invaluable tool for operators and service companies. Enhanced Safety: Equipped with safety features, such as overload protection and emergency shut-off mechanisms, the Power Tong Test Stand prioritizes operator safety during testing procedures. Comprehensive Calibration: Regular testing and calibration using the Power Tong Test Stand ensure that your equipment remains compliant with safety regulations, minimizing the risk of equipment failure in the field. Mobile and Stationary Options: Available in both mobile and stationary configurations, the test stand can be easily integrated into existing workflows, whether on-site or at a service facility.

Expert Remanufacturing: Texas International provides high-quality remanufacturing services to restore equipment to like-new condition. Comprehensive Overhaul: Our process includes disassembly, inspection, repair, and reassembly, ensuring all components meet stringent performance standards. Cost-Effective Solutions: Remanufacturing offers a cost-efficient alternative to purchasing new equipment, reducing overall expenses without compromising quality. Extended Equipment Life: By refurbishing and updating existing assets, we extend their operational lifespan and enhance reliability. Customization: We tailor remanufacture processes to meet specific customer requirements and operational needs. Quality Assurance: Each remanufactured unit undergoes rigorous testing to guarantee optimal performance and safety. Formalized Process: Our structured remanufacturing process follows industry best practices and formalized protocols to ensure consistency and quality.

Manual clamps are equipped with screw and nut combination. The nut secures the clamp around the pipe and should be tightened with the supplied nut wrench. The clamp grips uniformly by design. The individual links give the clamp flexibility to wrap around the pipe and the inserts are spring loaded. At Texas International Oilfield Tools, we also offer the Hydraulic Safety Clamp is a specialized device designed for use in the oil and gas industry. It enhances safety during drilling and completion operations by securely gripping pipes or tubing, preventing accidental release or slippage. The clamp utilizes hydraulic mechanisms for precise control and reliable performance under high-pressure conditions. Its robust construction and user-friendly design make it essential for maintaining operational safety and efficiency in challenging environments.

The Insert Bowl provides the necessary wedge surface for hand slips and allows a uniformed radial load distribution in the Master Bushing. Insert Bowls are fixed during use.