_시점1 (1)_700.webp)
mightyZAP 12Lf series micro linear servo actuators
Micro
Micro size linear actuator with built-in drive circuit, position sensor, DC motor and gear box.
Smart
Smart servo features such as position, current, speed control with position/current feedback.
Roburst
Strong force comparing its small size (max 10kg rated load)
mightyZAP 12Lf series micro linear servo actuators
Miniature size linear servo actuators with smart servo features.
Stroke option :
27, 40, 53 and 90mm stroke
Rated load :
min.10~max. 100N (depending on the model and its gear ratio)
Speed (no load) :
min 7.7mm/s ~ max 110mm/s (depending on the model and its gear ratio)
Communication / Protocol :
RS-485 or TTL/PWM, IR Open protocol (default) and industrial MODBUS RTU (switchable)
Size/Weight :
57.5(L)x29.9(W)x15(H)mm/ 49~52g (27mm stroke model)
Mechanical self-lock :
Varies by model
Current consumption :
20mA(idle), 380mA(rated), 800mA(stall/default), 1600mA (stall/max)
Recommended max duty cycle :
50%
Repeatability :
30μm (27, 40mm stroke models), 40μm(53mm stroke model), 50μm(90mm stroke model)
Input voltage :
12VDC
Description
- The 2nd generation mightyZAP series supporting dynamic speed & current control as well as position control along with position & current feedback
- Built-in drive circuit, position sensor, 12mm diameter coreless DC motor and gear box
- 27/40/53/90mm stroke option
- Rated Load of 12N ~ 100N according to gear ratio for each stroke
(Speed is inversely proportional to Rated Load, so the stronger the Rated Load, the slower the speed.)
-Support RS-485 or TTL / PWM communication
* TTL / PWM communication version operates by automatically recognizing the input TTL / PWM signal
* When using PWM communication, only the position command is available without position feedback (For feedback feature, use TTL or RS-485 communication)
Both MODBUS RTU and IR open protocols available (Default : IR Open protocol)
- Built-in drive circuit, position sensor, 12mm diameter coreless DC motor and gear box
- 27/40/53/90mm stroke option
- Rated Load of 12N ~ 100N according to gear ratio for each stroke
(Speed is inversely proportional to Rated Load, so the stronger the Rated Load, the slower the speed.)
-Support RS-485 or TTL / PWM communication
* TTL / PWM communication version operates by automatically recognizing the input TTL / PWM signal
* When using PWM communication, only the position command is available without position feedback (For feedback feature, use TTL or RS-485 communication)
Both MODBUS RTU and IR open protocols available (Default : IR Open protocol)
