The Transmit/Receive Module splits 2 transmit input channels into 32 output channels.
Each channel delivers an output power of at least 3.2 W with a transmit efficiency of 35.5% or higher.
It features independent phase control for each transmit channel.
On the receive side, 32 input channels are combined into two output channels.
The total receive gain is 34 dB or greater, and each channel supports individual gain and phase control.
The noise figure is 3.5 dB or lower per channel.
Built-in monitoring functions include internal temperature monitoring and output signal monitoring.

The L-band 8-channel filter bank receiver module is equipped with eight internal filter bank channels, enabling improved reception performance by isolating specific sub-bands within the receive frequency range.
A 100W limiter at the input stage protects the receiver from high-power signals, and the module offers a low noise figure of 3.0 dB or less.
The input P1dB for the receiver is -20 dBm, and the module features a built-in path self-test function.

The 100W High Power Amplifier is an L-band amplifier that delivers 100W output across two channels with a 60% duty cycle.
It offers a gain of over 50 dB, with output flatness of 2 dB depending on the input signal level.
The amplifier provides an ACLR performance of -20 dBc at maximum output.
Equipped with an output-stage bandpass filter (BPF), it achieves excellent harmonic suppression of -70 dBc.
Built-in monitoring functions include output signal and temperature monitoring.

The Ku-band Amplifier Module is a low-power amplifier designed to amplify the LO (Local Oscillator) frequency in the Ku-band.
It provides a gain of at least 17 dB and an output level of 13 dBm or higher.
The module includes a built-in monitoring function for output signal detection.

The 200W High Power Amplifier is an L-band amplifier that delivers 200W output with a 60% duty cycle.
It provides a gain of over 53 dB, with output flatness of 2 dB depending on the input signal level.
At maximum output, it offers ACLR performance of -20 dBc.
With a built-in output-stage bandpass filter (BPF), it achieves excellent harmonic suppression of -70 dBc.
Built-in monitoring functions include output signal and temperature monitoring.

The X-band LNB is a satellite ground transport terminal that includes a transmission rejection filter and performs downconversion of X-band signals to IF using an internal reference frequency.
It features dustproof, moisture-proof, and waterproof protection, along with self-diagnostic functions such as a lock alarm.
The unit provides a total gain of over 60 dB and supports a wide bandwidth of 500 MHz.
Its frequency stability is maintained within 0.31 ppm.

The 20W X-band BUC is a satellite ground transport terminal that includes a receive rejection filter and performs IF-to-X-band upconversion using an internal reference frequency.
It features dustproof, moisture-proof, and waterproof protection, along with self-diagnostic functions such as fan and temperature alarms.
The unit provides a total gain of over 50 dB and supports a wide bandwidth of 500 MHz.
Its frequency stability is maintained within 0.35 ppm.

The UHF-band TRX module features transmit diversity, allowing selection between two transmit ports and providing an output power of at least 1 W.
It includes a gain control function for transmission and an internal local oscillator for IF-to-UHF upconversion.
Transmit functions also include ALC (Automatic Level Control) and over-temperature protection.
On the receive side, the module selects one of two input channels and performs downconversion.
It supports AGC (Automatic Gain Control) with a response time of 80 µs, enabling real-time gain adjustment based on input signal level.
The dynamic range of the receive input spans from -100 dBm to -20 dBm, and the noise figure is 5.0 dB or less.
Both transmit and receive paths include built-in path self-test functions.