The detector responds to slow growing fires as well as fast fire eruptions using improved triple IR (IR3) technology. The IP68 housing and heated optics keep the detector operating in all weather and light conditions with highest immunity to false alarms.
The Built-In-Test function continually checks window integrity and provides a Dirty Optics warning increasing uptime.
The detector provides high-definition (HD) video output of the monitored area with imaging of fire events and personnel at distances up to 260 ft. (80m) and Blackbox recording.
This allows the hazard management & first responders team to be aware of the exact situation before entering the hazardous area.
Highest immunity to false alarms and high immunity to reflected flares - FM certified.
Video Enhanced Flame Detection (VEFD™). Visible hydrocarbon flame detection using three clearly separated IR wavelengths (4.0–5.0 μm), combined with near-IR imaging for superior performance.
Each sensor has the same field of view to further improve false alarm immunity.
HD, or composite, video output with automatic HD video recording of fire events.
Fast flame detection, typically less than 5 seconds.
Detects up to 147 ft (45 m) for a 1 ft2 (0.1 m2) n-heptane fire.
5 selectable sensitivity levels.
3- and 4- wire, 0—20 mA sink / source, Alarm, Auxilary, and Fault Relays.
RS485 port using Modbus RTU.
Event logger: Alarms, faults & videos are logged to non-volatile memory for post-event analysis and investigation.
Built-in-Test (BIT) – Automatic and manual self-test of window cleanliness and overall detector operation, plus HART® 7, for configuration and maintenance.
Dirty optics warning for preventive maintenance needs.
Window heater to avoid condensation and icing.
Stainless steel tilt mount with horizontal and vertical adjustment.
The detector responds to slow growing fires as well as fast fire eruptions using improved triple IR (IR3) technology operating in all weather and light conditions with highest immunity to false alarms.
The detector provides high-definition (HD) video output of the monitored area with near IR filtered imaging of fire events and personnel at distances up to 80m. This allows the hazard management & first responders team to be aware of the exact situation before entering the hazardous area.
