CheckPoint’s New LeakLess Head Technology boasts surprising results for even the most seasoned pump experts. Tested to more than 100 million strokes yet the seals did not reach failure. The LeakLess design was initially engineered to answer the industry’s historical appreciation for diaphragm pumps, while hoping for higher pressures and more consistent injection volumes. The product exceeded its goals and now stands to revolutionize CheckPoint's Patented products beyond even this model release. Paired with the Series SLA electric drive, the pump delivers up to 50.87 USG/H (192.56 L/H) and can reliably inject into pressures up to 13,500 PSIG (931 BARG) per head. It features a robust casing and a variable eccentric drive designed to withstand harsh conditions of oil and gas installations, and it contains minimal moving parts to further guarantee long-term reliability and superior uptime. The Series SLA electric pump's controlled volume pump specifications and high metering accuracy meet or exceed API674 and 675 standards. A nearly infinitely adjustable stroke length of 0-1 in (0-25.4 mm) ensures extremely precise and accurate dosing and a large turndown ratio of 10:1*. The flow rate can be controlled while the unit is stopped or running by a single hand with the manual Vernier scale dial. Optional rotary actuators are available to allow for remote rate control, can be used on each injection head independently for multi-injection service and are available in many area classifications and control signal types. Multiple drives may be combined with one motor to provide redundancy, or to service several injection points. This feature aids in minimizing cost, footprint, and weight, while maintaining a high degree of accuracy at each individual point regardless of differences in operating pressures. CheckPoint’s Series SLA drives can be coupled, and a large selection of motors can be accommodated. The design of this electric pump provides a wide variety of solutions and ensures compliance to any electrical requirements. To meet a wide array of chemical injection applications and to reduce spares inventory through part interchange-ability, Series SLA pumps utilize CheckPoint’s distinguished LeakLess modular chemical heads, which offer a full range of plunger diameters from 1/8" to 1-1/2". Our pumps maintain unparalleled chemical resistance due to the essential integration of high-quality, proprietary seal materials. In order to meet a wide variety of chemical compatibility needs, wetted parts are available in an array of materials, such as 316 SS, Hastelloy C-276, Duplex 2205, Super Duplex 2507, PVC, ceramic and titanium, and seals are available in Viton, HNBR, FKM, and FFKM. All wet end construction materials meet the requirements of NACE MR0175 and ISO 15156.

CheckPoint’s positive displacement, reciprocating chemical injection pumps are specifically designed for, and extensively proven in, demanding oil and gas production applications worldwide. Our pumps are utilized in various industries, such as pulp, water treatment, fertilizer dosing, paper, and fluid processing applications, where precise delivery is operationally paramount. The pneumatic motor, composed entirely 316 SS, remains isolated from the wet end and is dependably able to run on pressurized gas or liquid without stalling. CheckPoint’s double-acting design eliminates a return spring, which greatly increases repeatability and reliability over time. The Series 1250 pump delivers up to 8.0 USG/H (30.38 L/H) and can reliably inject into pressures up to 12,000 PSIG (827 BARG). CheckPoint’s modularly designed chemical heads and range of plunger sizes meet a wide variety of injection applications. Our pumps maintain unparalleled chemical resistance due to the essential integration of high-quality, proprietary seal materials. In order to meet a wide variety of chemical compatibility needs, wetted parts are available in an array of materials, such as 316 SS, Hastelloy C-276, Duplex 2205, Super Duplex 2507, PVC, ceramic and titanium, and seals are available in Viton, HNBR, FKM, and FFKM. All construction materials are compatible with sour gas according to NACE MRO175 and ISO 15156. Only CheckPoint’s pneumatic pumps can recover exhaust gas under significant backpressure. This unique gas recovery system enables processes to reuse drive gas after it has powered the pump. Consider the environmental benefits, as well as the cost savings, achieved by rerouting spent drive gas to the suction side of a gas compressor. This exclusive feature aids in lowering gas emissions while powering thermoelectric generators, feeding catalytic heaters, and even running within enclosures while venting externally

From the isolated chemical head to the switching valve to the materials of construction, CheckPoint’s Series 8400 pump was developed for continuous, accurate, and reliable injection in harsh offshore and remote locations. No compromises were made. We designed this pump for vital, mission-critical chemicals like methanol, drag reducer, and other expensive, hazardous, and corrosive production compounds. In order to meet a wide variety of chemical compatibility needs, wetted parts are available in an array of materials, such as 316 SS, Hastelloy C-276, Duplex 2205, Super Duplex 2507, ceramic and titanium, and seals are available in Viton, HNBR, FKM, and FFKM. All construction materials are compatible with sour gas according to NACE MRO175 and ISO 15156. CheckPoint pumps do not contain any springs and have fewer moving parts than any other pneumatic pump in the industry, resulting in minimal wear, effective maintenance, and ultimately an increased life span. Our pneumatic pumps can recover exhaust gas, even under significant backpressure. This unique gas recovery system enables processes to reuse drive gas after it has powered the pump. Consider the environmental benefits, as well as the cost savings, achieved by rerouting spent drive gas to the suction side of a gas compressor. This exclusive feature aids in lowering gas emissions while powering thermoelectric generators, feeding catalytic heaters, and even running within enclosures while venting externally

CheckPoint’s Series SLA electric plunger pump delivers up to 50.87 USG/H (192.56 L/H) and can reliably inject into pressures up to 13,500 PSIG (931 BARG) per head. It features a robust casing and a variable eccentric drive designed to withstand harsh conditions of oil and gas installations, and it contains minimal moving parts to further guarantee long-term reliability and superior uptime. The Series SLA electric pump's controlled volume pump specifications and high metering accuracy meet API675 standards. A nearly infinitely adjustable stroke length of 0-1 in (0-25.4 mm) ensures extremely precise and accurate dosing and a large turndown ratio of 10:1* . The flow rate can be controlled while the unit is stopped or running by a single hand with the manual Vernier scale dial. Multiple drives may be combined with one motor to provide redundancy, or to service several injection points. This feature aids in minimizing cost, footprint, and weight, while maintaining a high degree of accuracy at each individual point regardless of differences in operating pressures. CheckPoint’s Series SLA drives can be coupled, and a large selection of motors can be accommodated. The design of this electric pump provides a wide variety of solutions and ensures compliance to any electrical requirements. To meet a wide array of chemical injection applications and to reduce spares inventory through part interchange-ability, Series SLA pumps utilize CheckPoint’s distinguished Series 1500 modular chemical heads, which offer a full range of plunger diameters from 3/8" to 1-1/2". Our pumps maintain unparalleled chemical resistance due to the essential integration of high-quality, proprietary seal materials. In order to meet a wide variety of chemical compatibility needs, wetted parts are available in an array of materials, such as 316 SS, Hastelloy C-276, Duplex 2205, Super Duplex 2507, PVC, ceramic and titanium, and seals are available in Viton, HNBR, FKM, and FFKM. All wet end construction materials meet the requirements of NACE MR0175 and ISO 15156.

CheckPoint's Series ATP3 is an economical electric pump solution with diverse capabilities, both onshore and offshore. Well-suited for solar, AC, and DC service, this pump features expandability to two heads, each with mechanical adjustment offering independent flow control from 0 to 100%. The Series ATP3's robust drive mechanism ensures minimal wear, smooth operation, and long-term durability. This versatile pump features advanced head technology, which includes an enclosed, nonadjustable seal, interior wipers, no backside suction, and additional seal protection, providing increased protection from water and dust ingress. The nonadjustable seal further protects the pump by preventing premature seal wear and unnecessary user error, such as over-tightening packing. Selecting the double-headed configuration provides an opportunity to reduce the chemical injection solution's footprint and optimize efficiency by utilizing a single motor for twice the injection capability. Flow efficiency is further maximized by bubble-tight check valves. CheckPoint engineers designed this pump with field efficiency in mind. The included stand ensures that the pump can be easily placed directly onto the ground or over existing tank containment basins; however, in the event that the stand is not needed, it can be easily removed and stored. Together, the Series ATP and its stand provide a quality, effective, and convenient chemical injection solution for a wide variety of applications.