The PNT500 is a rugged 3U VPX Assured Position Navigation and Timing(A-PNT) module aligned with the SOSA profile, offering multi-constellation QinetiQ Q40 GNSS, PTP Grandmaster timing, OCXO/CSAC fallback, and ruggedized reliability.
• QinetiQ Q40 multi-GNSS receiver with anti-jamming/spoofing
• IEEE 1588 PTP Grandmaster; OCXO or CSAC timing fallback, 1 PPS and reference outputs
• Rugged single-slot 3U VPX, SOSA-aligned

The FORCE2C is a rugged 3U VPX flight-certifiable mission computer featuring a QorIQ T2081, full avionics I/O, safety certification artifacts (DO-254/178C up to DAL A), and FACE compatibility.
• QorIQ T2081 (1.8 GHz, 4 cores), SBC314C SBC: 4 GB DDR3L, 16 GB SSD, PCIe Gen 2 ×4
• Avionics I/O: ARINC 429 (8 TX, 10 RX), MIL-STD-1553 (4), discrete I/O, serial (RS-422), GbE, USB, RS-232/422
• Rugged conduction-cooled build; MIL-STD / DO-160 rated; −40 °C to +71 °C
• DO-254/DO-178C certification artifacts available (DAL D to A)
• FAA certified (SOI complete), FACE compliant

The RES3000 is a compact, rugged fully managed Layer-2/3 Ethernet switch, optimized for SWaP and VICTORY-compliant military/industrial deployment, offering 12–24× 1 GbE (plus optional 4× 10 GbE), rich protocol support via OpenWare™, and wide-range rugged certifications.
• Form factors: 12× 1 GbE (~2 kg), 24× 1 GbE (~3 kg), or 24× 1 GbE + 4× 10 GbE
• Features: IPv4/IPv6 routing, OSPF/RIP/VRRP, VLAN (up to 4096), QoS, multicast, PTP, BIT, DoS prevention, sanitization, OOB mgmt.
• Ruggedized: Conduction/convection cooling, MIL-STD certifications, −40 to +71 °C
• Compliant with VICTORY networking architecture

Discover the superior technology and reliability of the SBC3513L, crafted to provide unparalleled performance and security for critical applications.
• Powered by Intel® Xeon® W processors, offering robust computational power.
• Extensive I/O options including Ethernet, USB, and DisplayPort for versatile connectivity.
• Supports Time Sensitive Networking (TSN) for precise and reliable network communication.

The SBC6511 Rugged Single Board Computer(SBC) from Abaco Systems features the new high performance, highly integrated Intel® Xeon® E processor (‘Coffee Lake Refresh’). Powered by Intel® Xeon® W processors, offering robust computational power.
• Supports up to 64 GB DDR4 SDRAM with ECC and up to 256 GB (or in some variants up to 480 GB) NVMe SSD storage
• Offers high-throughput networking: Dual 40 GbE data-plane (KR4 “fat pipes”)
• Features the Xilinx® Zynq® UltraScale+™ MPSoC FPGA (ZU7EG) for enhanced security

The SWE450S is a rugged 3U VPX fully managed Layer-2/3 Ethernet switch aligned with the compute-intensive SOSA profile, delivering high-performance 25/100 GbE switching and flexible I/O reconfiguration.
• High-performance 2 Tbps switch fabric with wire-speed throughput
• Front: up to 2x 100 GBASE-SR4 (MPO); Rear: 25/100 GbE KR4, 100/1000 BASE-T, USB-C, RS-232Reconfigurable fat-pipe to thin-pipe ports, speed downgrading capability
• Dual-core ARM + OpenWare™ management, sanitization support
• SOSA-aligned (SLT3), rugged air- & conduction-cooled options

The SWE550S is a rugged 6U VPX fully managed Layer-2/3 Ethernet switch aligned with the SOSA profile, providing blazing-fast 25/100 GbE switching via a 3.2 Tbps fabric and flexible I/O reconfiguration.
• 3.2 Tbps switch fabric delivering full wire-speed bandwidth (~2.5× typical)
• Front: up to 2×100 GBASE-SR4 (MPO); Rear: up to 7×100 GBASE-SR4, SWE540A-compatible I/O
• Fat-pipe ports reconfigurable into thin-pipe ports; copper ports support 25/100→10/40 Gb speed downgrade
• Dual-core ARM + OpenWare™ management; built-in storage sanitization
• SOSA-aligned 6U VPX form factor; air & conduction cooled; rugged Levels 1, C, E

The HPC2812 is a rugged 6U VPX high-performance computer aligned with the compute-intensive SOSA profile, delivering top-tier processing with dual Intel® Xeon® D-2700 (Ice Lake-D) processors and flexible expansion capabilities.
• Supports up to 128 GB DDR4 SDRAM with ECC and 480 GB NAND Flash (NVMe SSD) per node
• Offers 2× 100 GbE (or 4× 40 GbE) data plane with RDMA, PCIe Gen 4 expansion plane, plus control and management plane support
• Features the Xilinx® Zynq® UltraScale+™ MPSoC FPGA for enhanced security

The MAGIC1A is a rugged 3U VPX SWaP-C3 high-performance embedded computer combining an Intel Xeon E3-1505M v6 CPU and NVIDIA Quadro P2000 GPU, offering strong compute performance, broad I/O, rugged resilience, and flexible software support.
• Xeon E3-1505M v6 quad-core CPU + Quadro P2000 GPU → ~2.3 TFLOPS
• Ethernet, USB, serial, MIL-STD-1553, ARINC 429, DisplayPort/DVI, GPIO; up to 8 TB removable SSD with fast-purge
• MIL-STD rated, baseplate or fan cooling; −40 °C to +65 °C range
• Supports Linux/Windows/VxWorks & CUDA/OpenCL/DirectX/OpenGL; includes AXIS software toolkit

The GRA117S is a rugged 3U VPX SOSA-aligned video graphics and GPGPU card delivering high-performance AI and graphics with the NVIDIA RTX™ 5000 and PCIe Gen-4 connectivity.
• NVIDIA RTX™ 5000 (Ada Lovelace) GPU: 16 GB GDDR6 ECC, 9,728 CUDA/76 RT/304 Tensor Cores
• PCIe Gen-4 interface, AV1/H.264/H.265 codecs, GPUDirect RDMA
• Rugged design: conformal coating, air- & conduction-cooled, −40–71 °C range
• SOSA slot profiles 14.6.11 & 14.6.13 compliant
• Windows/Linux drivers, CUDA/CUDA-X/OpenCL support