Albany Engineered Composites (AEC) has placed considerable emphasis on the development of in-house resin transfer molding for the fabrication of high performance structural composites. Resin transfer molding produces parts to net shape with good surface finish, low void content and required levels of fiber volume.

​ Albany Engineered Composites (AEC) provides a full spectrum of design, analysis, fabrication and assembly of primary aerospace airframe structural assemblies and components, including: Fuselage and wing skins (co-cured stiffeners) Ribs and spars Frames Rotor blades Control surfaces AEC employs the latest in sophisticated manufacturing processes and technologies necessary for the fabrication of the most complex and close-tolerance structures.

SLC

Customer: Snecma (Safran Group) Composite fan module (comprised of blades, platforms, spacers, and fan case) is 300 pounds lighter compared to equivalent metallic components per engine Through a highly collaborative relationship AEC and Snecma (Safran group) have developed 3D composite fan module components for the next-generation LEAP TM aircraft engine.

Discover the third Safran and Albany composite fan blade production plant, for LEAP engine, in Mexico.

Albany UT Location

​ The braiding process is one of the most practical and effective manufacturing methods available to the composite industry today. To place the economy of braiding in perspective, it is estimated that 40% of conventional filament winding would be more cost effective by braiding.

Albany TX

​ Albany Engineered Composites (AEC) has more than four decades of experience in design and fabrication of composite structures, many of which have been fabricated using pre-preg materials and lay-up autoclave cure processing. AEC facilities have the capability to manufacture composite structures using a variety of material systems including Epoxy, BMI, Phenolic, Cynate Ester, and high-temperature Polyimide resins.

​Since 1967, Albany Engineered Composites (AEC) has been a leading designer and producer of composite tanks for commercial and defense applications. As a pioneer in composite tank technology, AEC continues to apply and advance this specialized technology to meet current and future requirements and applications.

​ As an extension of our Resin Transfer Molding (RTM) expertise, AEC offers our customers the capability to perform Vacuum assisted Resin Transfer Molding (VaRTM) for large composite structures. VaRTM is a process for molding fiber reinforced composite structures in which a sheet of flexible transparent material such as nylon or Mylar plastic is placed over the preform on the mold and sealed.

​ ​ The AEC STaR product line meets the aerospace industry demand for high-performance, light-weight structural composite hardware providing high strength-to-weight ratio vs. traditional metallic parts. Using patented manufacturing technology licensed by Bodair S.A. and a unique monolithic design, AEC produces struts, tubes and rods for commercial and military aircraft applications that exceed other composite production methods in weight savings.